25.5x25.5mm DarwinFPV F411 Flight Controller with 5V BEC 45A 3-6S ESC ELRS 2.4G Receiver AIO Compatible with CineApe35 FPV Racing Drone
安全なチェックアウト

無料ギフト
Roymallへようこそ、プレミアムデパートメントストアギフトを購入するための専門ウェブサイトです。私たちはあなたのサポートを高く評価し、感謝の気持ちを込めて、購入ごとに特別な無料ギフトをお届けします。私たちと一緒にショッピングを楽しむことで、ライフスタイルを向上させる高品質な製品を楽しむだけでなく、注文ごとに特別な無料ギフトも受け取ることができます。 私たちのコレクションを探索して、完璧なギフトを見つける準備はできましたか?プレミアムデパートメントストアアイテムのセレクションを閲覧し、注文をして、購入品と一緒に無料ギフトが届くのを楽しみにしてください。配送ポリシー
注文を受領後、商品を安全にお届けするために努めます。配送詳細は確認メールに記載されます。ほとんどの場合、注文は2日以内に処理されます。特別な状況下では、以下のように遅れることがあります:土曜日、日曜日、または祝日に注文をした場合、2日遅れます。通常、飛行機の遅延やその他の環境要因の影響を受けない場合、5〜7営業日(月曜日から金曜日)かかります。私たちの配送サービスは世界中に及ぶため、配送時間はあなたの場所によって異なります。遠隔地や国の場合は数日かかる場合がありますので、お待ちください。1. 返品・交換ポリシー
私たちはroymall.comで購入した商品のみ受け付けます。地元のディストリビューターや他の小売店で購入した商品は返品できません。 最終販売商品や無料ギフトは返品できません。返品の対象となるためには、商品は未使用で受け取ったときと同じ状態でなければなりません。また、元のパッケージに入っている必要があります。返品手順を受け取った後、返品商品をパッケージに詰めて地元の郵便局または別の宅配業者に渡してください。返品または交換商品を受け取った後、3〜5営業日以内に処理します。返金は自動的に元の支払い方法に反映されます。カスタムサイズ、カスタムカラー、カスタムプリントなどのカスタム製品は返品または交換できません。さらにヘルプが必要な場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +8619359849471
2.返金ポリシー
返品パッケージを受け取り、確認した後、全額返金または100%ストアクレジットを受け取ります。返金は自動的に元の支払い方法に反映されます。 配送料や関税、手数料は返金対象外です。パッケージが発送された後、追加の配送料は返金できません。これらの費用を支払う責任があり、私たちはそれらを免除または返金することはできません。返品商品を受け取り、確認した後、返品商品を受け取ったことを通知するメールを送信します。また、返金の承認または拒否についても通知します。返金プロセスに関する問題がある場合は、お問い合わせください。 service@roymall.com またはWhatsapp: +8619359849471This 25.5x25.5mm DarwinFPV F411 45A ELRS AIO includes flight controller, ESC and receiver.
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
Description:
This is a unique AIO that meets the needs of today"s industry. It has a 25.5x25.5 mounting hole pitch, but it does not rotate 45u00b0! The advantage of this is a more compact and safer installation layout. Unlike traditional AIO, the electronic components on both sides are exposed outside the frame. It is more like a stack, but only one layer. You can install DJI O3, VISTA, HDZERO, Avatar and other digital VTX on it, which is very convenient.
All interfaces are of direct plug-in design, and installation can be completed without soldering any wires, making it suitable for novice players who cannot solder. The USB interface is also designed to face upward, which solves the industry problem of difficulty in adjusting whoop frame parameters.
The ESC and FC are designed separately to separate high-power and small-signal components to reduce interference and reduce the failure rate. Even if they are damaged, there is no need to replace them all together, which reduces maintenance costs. In addition, it also integrates an ELRS 2.4G receiver, which is especially suitable for users who are sensitive to cost and space.
Of course, we have also carried out the same glue protection treatment on the circuit board as always. Through feedback from tens of thousands of users in the past, this protection measure can indeed significantly reduce the risk of accidental damage due to impact, rain, etc.
Feature:
1. 25.5u00d725.5 mounting hole position, the entire AIO can be placed in the frame, and the protection is better;
2. It is more convenient to install DJI O3, VISTA, HDZERO, Avatar and other digital VTX;
3. Integrated ELRS 2.4G receiver, suitable for players who are more sensitive to cost and compactness;
4. ESC and FC isolation design reduces failure rate. Even if it is damaged, there is no need to replace everything together, reducing maintenance costs;
5. All interfaces are plug-in designs, suitable for novice players who cannot weld;
6. The USB interface has a straight-out design at the top, making it easier to adjust parameters of the whoop frame;
7. Glue-filled protective treatment greatly reduces the risk of accidental damage due to impact, rain, etc.
Specification:
Brand: DarwinFPV
Model: F411 45A ELRS AIO
Name: | Specification: |
F411 45A ELRS AlO | Input Voltage: 3-6S Lipo |
Mounting Dimensions: 25.5u00d725.5mm | |
Dimensions: 58.5u00d738u00d713mm | |
Weight: 16.4g | |
Package Dimensions: 79u00d755u00d730mm | |
Package Weight: 49.5u00b12g | |
DarwinFPV F411 45A ELRS AlO - FC Board | Main Control Chip: STM32F411 |
Gyro: MPU6500 | |
OSD: AT7456E | |
Receiver: SPI ELRS 2.4G | |
Input Voltage: 3-6S Lipo | |
BEC: 5V/0.5A u00d7 3 (Built-in overcurrent protection function) | |
USB Interface: 1x USB Type-C | |
Serial Port: UART1, UART2 | |
Soft Serial Port: S5 | |
Firmware : DARWINF4SX1280HD (BetaFlight) | |
Dimensions: 38u00d723u00d78.5mm | |
Weight : 3.9g | |
DarwinFPV F411 45A ELRS AlO - ESC Board | Main Control Chip: EFM8BB21 (8 bit 48MHz) |
Input Voltage: 3-6S Lipo | |
Continuous Current: 4x45A | |
Peak Current: 4u00d755A (5S) | |
Support Throttle Protocol: Dshot 300/600 | |
Galvanometer: Support (Current Meter Scale=125) | |
Firmware: J_H_40 (BlueJay) | |
Power Cable: #16AWG/120mm | |
Mounting Dimensions: 25.5u00d725.5mm | |
Dimensions: 38u00d738/x4mm | |
Weight: 6.6g |
Package Included:
1 x DarwinFPV F411 45A ELRS AIO
1 x 120mm power wireuff08#16AWG red/blackuff09
1 x Analog camera wireuff083Puff09
1 x Analog VTX wireuff084Puff09
1 x GPS wireuff084Puff09
1 x HD VTX wireuff084Puff09
2 x SH1.0 plastic shelluff083Puff09
3 x SH1.0 plastic shelluff084Puff09
1 x Spare screws
5 x M2*6.6 Shock absorbing ball(yellow)
1 xType-C dust plug
1 x Stickers
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">
mso-bidi-font-family:"Times New Roman";font-size:11.0000pt;mso-font-kerning:1.0000pt;">